Power strips and SPD
Power strip with SPD and Easy Eject system that makes it easier to disconnect the plug and makes using of electrical equipment safer. Just press the plug down and the device will disconnect it from the power supply itself, without the need to pull it out. The strip has a 1.5-meter cable and allows to connect 5 electrical devices with a total power consumption of 3680W. The sockets have all grounding pins. The power can be turned off with the two-way main switch with backlight. The device effectively protects connected equipment against voltage surges caused by weather conditions or network failures. It has a USB-C fast charging port. The strip is equipped with a flat plug, so you can connect it to a power outlet behind the furniture and avoid creating a wide gap between the wall and the piece of furniture.
| General information: | |
|---|---|
| Max. load: | 3680 W |
| Wire cross-section: | 1,5 mm² |
| Type of socket: | 2P+E |
| Number of wires: | 3 |
| Current: | 16 A |
| Standard of the socket: | french (type E) |
| Number of sockets: | 5 |
| Degree of protection (IP): | 20 |
| USB charger: | Yes |
| Nominal voltage: | 230V~, 50Hz |
| Colour: | white |
| Safety shutters: | Yes |
| Dimensions - depth: | 47 mm |
| Dimensions - height: | 395 mm |
| Number of USB connections: | 2 |
| Output voltage of the USB charger: | 5VDC/3,4A max. 17W |
| Type of cable: | H05VV-F |
| Over voltage protection: | Yes |
| Surge protection type: | Type 3 |
| Wire length: | 1.5 m |
| Insulation type: | PVC |
